Steps for an Oil Tank Installation

You’ve finally decided to install an oil tank on your property. Here’s how to properly install the tank, including getting a permit, supporting the tank, and installing the piping. This article will walk you through the process step-by-step. Then, you can begin enjoying the benefits of using a tank for more information about it try to visit or inquire about oil tank installation westchester county ny .

Properly install an oil tank

You need to know how to install an oil tank properly. There are several factors to consider, including the location of the tank, the previous use, and the surrounding environment. Please make sure the tank is at least five feet away from any fuel-fired appliances, and the tank should be installed so that there is plenty of room to check it thoroughly. If the tank is near walls or floors, allow four inches of clearance from the floor and tank bottom.

Installing an oil tank requires two types of pipe. You can use a 2-inch black iron pipe or galvanized steel pipe. The pipe should be installed at least six inches above the ground and 24 inches above the tank. Use high-quality pipe dope on all fitting connections, including the pipe going into the tank. For safety, you can install a vent alarm on the line to prevent oil leaks. Once the oil tank is installed, it is essential to inspect the tank for leaks and cracks.

Get a permit

If you want to install an oil tank in your home, you need a permit. This document, which is usually blurry, shows where to install the oil tank. The tank size is on the permit to the right, along with where you will place it. If the tank is underground, the letter “X” indicates it must be underground. Then you will need to get a plumber’s permit, which requires you to use a licensed plumber.

Once you have the permit, you must find out if the oil has contaminated your property. You may be able to tell if there is contamination by the appearance of soil and a sheen on groundwater. You can also get samples taken from the site to see if it is safe for drinking water. To save money, make sure you contact your oil company first. This company will often do the sampling for you, and it is also recommended that you ask your contractor to write a letter report to show that the oil tank was removed. In addition, homeowners should take pictures of the tank and have their contractor write a letter stating that the oil tank is no longer present on their property. This will be useful for homebuyers who want to know that the tank is not in their home.

Properly support the tank

During the installation process, ensure the oil tank is level and positioned correctly. Check for signs of shifting or stress in the previous oil tank. If this is the case, you may want to put a concrete slab or firmer ground under the new oil tank. Additionally, consider the tank’s proximity to a building or tree trunks. Once you know that these aspects are addressed, it will be easier to support the tank properly.

First, a technician must cut a rectangular opening on the side of the oil tank. A metal cutting blade is used to cut, but the personal protective gear is recommended. A Sawzall(r) fitted with a coarse metal blade can be used to create a large working opening. The technician should make sure the cut extends above the end of the oil tank to avoid spilling oil on the floor.

Install the piping

Before you begin installing the piping for an oil tank, you should determine the type of surface you need. In some cases, it will need to be elevated and/or firm. If the tank was previously on a different surface, it might be necessary to install a new concrete pad. Whether you use a standard asphalt driveway or a poured concrete pad, make sure you use a good quality pipe dope. You may also want to add alarms to the tank.

The fill line for an oil tank is located at the opposite end of the supply connection pipe. This is the pipe that will fill the tank with oil. Typically, this is made of galvanized steel and two inches in diameter. The fill line must be fitted with a fill cap. The vent line is located next to the fill line and is approximately one and a half inches in diameter. Again, it is important to install the piping according to the local codes and specifications.

Protect the tank from falling debris

There are several ways to protect an oil tank from falling debris. One option is to use a rain cap. This will prevent water from getting into the tank and can prevent spills. Additionally, you can use a home heating fuel additive to displace water and avoid sludge. Fuel companies often add this additive to fuel tanks, but you can also request it if you have a specific problem. Another option is to purchase a water absorber product that drops into the tank and is removed at the end of the day.

Regardless of your situation, protecting the oil tank from falling debris is important. If you live in a cold climate, clear the area around the tank of snow and ice. Also, ensure that the roof is clear of any obstructions, such as tree branches or fallen trees. Be sure to check the oil tank frequently and take measures to protect it from falling debris. While you’re at it, be sure to check for signs of damage and do not push or pull on fragile parts.

Install the vent line

If installing an oil tank inside your home, you should first install the fill line. This piping is about two inches in diameter and is made from galvanized steel. Installing the fill line requires placing a cap on the outer end of the pipe. In addition, you should install a vent line adjacent to the fill line hole. Installing the vent line is as simple as following the installation instructions.

You can install a vent alarm in any above-ground oil tank to warn you of possible leaks. A vent alarm is an audible whistle that emits a whistle while filling the tank. When the oil reaches the whistle’s tip, the fill pipe will shut off, preventing a spill. A vent alarm is also helpful for monitoring the level of oil inside the tank. It will alert delivery people to the need to refill the tank.

The Best Things About COD Oil Delivery

Cash oil delivery is a convenient method of getting your fuel at a discounted price. You do not need a service contract, and you can set the schedule of oil deliveries. Cash delivery is also less expensive than full-service delivery and burns cleaner. Here are some benefits of COD oil delivery:

It does not require a service contract

If you are looking for an oil delivery company to fill your tank, you may wonder if COD is better than full-service oil delivery. Full-service oil delivery Ridgewood NJ  means that the oil company will keep filling your tank for the contract duration. In addition, they will also provide service and maintenance for your equipment. COD allows you to choose the best supplier.

A significant advantage of COD is that it allows you to choose the price of heating oil that you need. Unlike a standard contract, a COD delivery company will charge you based on the CT oil price when you order it. That means that you could pay a higher price for your fuel than you would if you had signed a service contract. Additionally, COD oil delivery does not require a service contract, so you can switch to automatic delivery when you are ready.

It is cheaper than full-service

If you’re unsure which type of fuel oil service you need, you should think about COD (cash on delivery) oil delivery. Full-service companies typically fill your tank when they see a need for it. This means you might not be able to schedule your filling at a convenient time. On the other hand, COD oil delivery lets you schedule fillings in advance. For example, you can set up a filling time based on weather conditions.

Full-service fuel retailers can offer lower COD prices to offer their customers a lower “no-service” price. This way, they can provide customers with the convenience of paying for their oil before it arrives. In addition, customers can control the amount of money they spend on oil by scheduling their deliveries. By contrast, customers who choose COD have to pay for the convenience of the service, not the company.

Is cleaner burning

A full-service COD, an oil delivery company, has many benefits over a COD-only oil company. These include automatic delivery, a broader selection, and an established relationship with an oil provider. COD oil can be cheaper; it is essential to note that it requires cash payment at delivery. COD oil can be a better option for a consistent fuel supply.

Bioheat fuel is another advantage. This fuel contains almost no sulfur and is entirely biodegradable. It can also reduce particulates and greenhouse gases. Bioheat oil delivery services also reduce the need for repairs to heating equipment. There are no modifications to the fuel system, and delivery is similar to the service provided. These benefits make using Bioheat a greener option for those who wish to reduce their carbon footprint while using fuel oil.

It is easier to fill.

Is COD oil delivery easier to fill? COD oil delivery allows you to choose the supplier who fills your tank, and you can also schedule the filling of your tank based on when you can pick it up. In addition, while full-service fuel oil companies require that you sign a contract with them, you don’t have to use them until the end of the agreement, which is usually for one year. In contrast, with COD oil delivery, you can choose any supplier that you want to use and fill your tank.

COD oil delivery has many advantages, including lower prices. COD companies generally charge a lower rate for their services because they need to be paid in advance, but they usually require a minimum order and have fewer drivers. Another advantage of cash oil delivery is that you have more control over when you fill your tank and which oil dealer you choose. By putting your preferences in writing, you can also make sure you get the best deal.

Celebrating the Life of Your Pet

Pets are members of the family. When they pass on, it can leave a very real hole. Children and adults alike may grieve the loss of a pet. Celebrating the life of your pet can help ease the pain of the loss. It allows space for mourning and an opportunity to say goodbye.

Celebrating the Life of Your Pet

Create a Memorial Spot

Whether you decide to cremate your pet or have an individual lawn burial San Francisco CA, you may wish to have a small memorial spot at your home. This can be a living memorial, such as a tree, or it can be a plaque or stone engraved with the pet’s name that you keep in your home.

Either way, you and other family members will have a place close by where you can spend quiet time remembering your pet. It’s a space for personal reflection and mourning, which can bring comfort over time.


Did you rescue your pet? Did your pet love the neighborhood children? Consider volunteering in honor of your pet. The local Humane Society or animal shelter often need volunteers. Local boys and girls clubs can also use a hand. This is a great opportunity to share with others the love your pet shared with you.

Plan a Service

This can be as simple or as elaborate as you like. Invite close friends to the park where your pet loved to play for an intimate memorial service. Have extended family to your home for a potluck supper where everyone shares their favorite memories. It’s healing to spend time with others who loved your pet, too.

There are many good causes that could use a monetary donation. Give in the name of your pet. You can contribute to a local rescue society, a nature preserve, or any organization that will help you preserve your pet’s memory. 

Car Alarm: Its Usefulness and Operation

Installing an alarm on a car helps protect against theft. Currently, there are more and more sophisticated models with additional features. It is not necessarily installed automatically on your vehicle, you can fit it yourself or call on a professional in a workshop for car alarm installation Elmont NY-located.

Car Alarm: Its Usefulness and Operation

How Does It Work?                           

A car alarm does not have the same operation depending on the model you choose. All the alarms can be activated remotely, using a remote control, if you see malicious people approaching your vehicle.

The Components

Your car alarm has the following three distinct components:

  • The alarm center: thanks to this, you can set up the alarm device or deactivate it if you wish;
  • The remote control: it is the latter that allows you to control the alarm center remotely. In some situations, you may have multiple remotes;
  • The siren: it will go off at the slightest attempt to break into or steal your vehicle.

The Deactivation

A car alarm can be deactivated very easily. This manipulation will only take you a few minutes and does not require any special equipment. The various manipulations specific to your alarm are available in your vehicle manual.

Every Alarm is Different

Some alarms will immediately cut off the ignition of the vehicle, and it will be impossible to start it. Others cut it off on a delayed basis, within minutes of the alarm being triggered. Finally, some alarms also prevent your vehicle from restarting.

The Most Advanced Ones

For the most advanced models, the alarms are equipped with volumetric sensors and shock sensors. They will respectively detect a human presence and broken glass. Most modern alarms are wireless and activated using a remote control.

The Brands

Finally, there are many different brands on the market such as the Cobra alarm. Do not hesitate to compare the models before finalizing your purchase. It should be noted that many motorists apply a car alarm sticker to notify passers-by that it has an alarm system.

Maintenance Tips for Your Boat Trailer

Boat owners know how much maintenance is required to keep things afloat. However, the boat itself is just one aspect of being a seafarer. You need to take care of the equipment and machinery that stores and transports your boat.

Boat trailers are essential for storing and transporting your boat. If you let them fall into disrepair, you will be left with a beached vessel. See below for some boat trailer maintenance tips.

boat trailer repair pennsylvania

Keep Rust Off

Rust is a constant threat to metal. You need to consistently inspect your trailer for rust, especially in damp climates. The best way to repair rust is to avoid it. Do not let your trailer sit in moisture or wet weather. Keep it covered and clean year-round. Sometimes, you can sand it off and paint over it if you do notice rust. You can reach a point of no return, however. If you notice cracks or fractures in your trailer, this can spell bad news. Do not use a trailer that shows damage to its structural integrity. Contact a professional who specializes in boat trailer repair Pennsylvania.

Do Not Overheat Your Bearings

Bearings need to be kept from overheating at all costs. When you first pull up to a boat launch, do not immediately back into the water. The bearings will be hot from the drive, and you need to let them cool off. If you submerge hot bearings in water, they tend to soak up water. This is a recipe for rusted-out bearings and catastrophic failure. Bearings take on a lot of stress and pressure, so they should be repacked at least once per year. It would be best if you also repacked them before storing a trailer.

Keeping your boat trailer rust-free is an excellent way to extend its life. Do not let your bearings corrode, and occasionally give your trailer a new paint job. If you notice severe rust damage, contact a professional before taking your boat on the road.

2 Ways to Improve a Personal Boat

Whether you have your own personal boat or if you work on repairing and maintaining one, it can be important to know simple steps to improve a boat. These improvement ideas are great for boats that are not in current need of repair. They are optional, but preferred improvements for many boat owners. 

deck boat ladders

Install Stairs

Adding deck boat ladders is a great idea for boat owners who are also avid swimmers, or for those who want an additional safety feature. As the name implies, these ladders can be attached firmly to the deck of the boat. 

Boat owners or users can take these ladders to go in or out of the water. This is a great option for when you want to swim, but are too nervous to jump right in. Having a deck boat ladder also makes it easier to get back into a boat whenever you have gotten into the water, purposefully or not.

Add Fishing Rod Holders

Like swimming, fishing is a common activity on boats. So, why not accommodate for it? Fishing rod holders can usually be done in a couple of easy steps. Some rod holders can be clipped onto the rails or clamped on (and tightened using a wrench). Others use surface mounts. These are also usually added using wrenches, Allen keys, or screws. All in all, anyone should be able to add a fishing rod holder easily.

These two boat upgrades are relatively inexpensive and easy to install. A professional may be needed to install the deck stairs/ladder, but not to install fishing rod holders. Everyone on the boat, children included, can also use these upgrades with ease. All in all, these upgrades are so easy to do, there’s hardly a reason to skip out on doing them. So, which will you do first?